Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Norman, OK
A chimney inspection in Norman tells you what’s actually going on inside a flue you can’t see, and it’s the right first step whether your home is a 1930s bungalow near campus or a newer build off Robinson Street. Norman gives us two very different kinds of chimney work in one town. Downtown and the historic districts have hand-built masonry flues that were never designed for a standard brush. The west-side subdivisions have factory-built fireplaces that soot up quickly and rust at the seams. Before anyone quotes a repair, we put a camera in the flue and show you what we find. Call (888) 561-3468 to book an inspection. We answer 24/7.
Why Norman Homes Are Different
Norman’s housing splits cleanly by decade, and each half of town needs different tooling. The pre-war bungalows in Central Norman and the Walker historic district were built with narrow, hand-built masonry flues. Some are original unlined brick with soot glazed onto the mortar after decades without a sweep. Many crowns have spalled because Oklahoma’s freeze-thaw cycles work on them every winter, and long humid summers turn leftover creosote into an acidic sludge that eats at the masonry from the inside. West Norman’s 1980s-2000s subdivisions are the opposite problem. Those prefab metal fireplaces have short, straight flues that clog fast from gas logs and the occasional wood fire, and shallow fireboxes that fill with debris quickly. A hard January freeze and a spring hailstorm both send techs out to cracked crowns and rusted firebox seams in the same week. One crew has to carry both tool sets and know which one belongs in which part of Norman.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Norman Services
Most calls we take in Norman fall into two buckets: getting the flue cleaned out, and fixing what the inspection found.
Chimney Sweep in Norman
Our chimney sweep work in Norman starts with a look at what type of flue we’re dealing with, because a rigid rotary brush that’s fine in a straight prefab chase can tear up a hand-built masonry flue from the 1940s. We use the brush and rod set that matches the flue, pull the creosote out with a sealed vacuum running the whole time, and photograph the inside before and after so you can see the difference. In west Norman’s prefab fireplaces, the short flue soots up faster than most homeowners expect and needs more frequent attention than a full masonry chimney. Downtown, we’re often sweeping a flue that hasn’t been touched in years.

Chimney Repair in Norman
Our chimney repair work in Norman covers the two failure patterns this town produces. On the old brick chimneys near campus, that’s usually a spalled mortar crown, a failed flashing detail, or a flue that’s lost its liner and needs resurfacing – and where the masonry is still structurally sound, HeatShield ceramic resurfacing restores the flue from the inside without pulling the whole liner out. On the newer west-side builds, it’s more often rusted prefab firebox seams, a cracked chase cover, or a damper that no longer seals. A Gelco cap and a proper crown repair keep wind-driven rain out so the freeze-thaw damage doesn’t start again next winter.

Chimney Inspection in Norman
Chimney Inspection in Norman starts with the era of the house, because that tells us what we’re likely to find. A 1930s bungalow in the Walker historic district may still have its original unlined flue, glazed with decades of soot and spalling at the crown from freeze-thaw. A 1990s west Norman build usually has a prefab firebox with a short flue, and the problem is more often a rusted seam or a failed damper than masonry. We use a camera on both, and you see the footage. Our Chimney Inspection produces a written record you can hand to a buyer, a lender, or your own file, and our technicians have up to experience reading what that footage shows.
Fireplace Inspection
Signs you need it
Smoke rolling back into the room, a damper that won’t open fully, or a firebox floor that feels soft or sounds hollow when tapped are the usual triggers, along with any fireplace you’ve bought a house with and never had looked at.
What it costs in Norman
A fireplace inspection in Norman typically runs $99-$250, and it’s often folded into a sweep for a single combined visit.
How we do it
We open the damper, check the firebox walls and floor for cracks and gaps, look at the smoke chamber and smoke shelf above the damper, verify the firebox-to-flue connection, and run a camera up to confirm the flue matches the firebox opening.
Chimney Flue Inspection
Signs you need it
A fireplace that drafts poorly, a sweep that turned up heavy glazed creosote, or a prior liner repair that needs verifying all point to a flue inspection rather than a general fireplace check.
What it costs in Norman
A focused flue inspection in Norman generally falls in the $99-$250 band, and it’s included with a standard sweep at no extra charge.
How we do it
We send a camera up the flue from the firebox to the cap, record the whole run, check for offset tiles, missing mortar joints, gaps at the thimble, and creosote stage, then mark anything that needs repair on the footage so you can see it too.
Level 2 Chimney Inspection
Signs you need it
Buying or selling a house, changing to a new appliance, or recovering from a chimney fire are the three situations that call for a Level 2 inspection rather than a basic one.
What it costs in Norman
A Level 2 chimney inspection in Norman typically costs $150-$350, and it’s the report real estate transactions and insurers usually ask for.
How we do it
We inspect every accessible part of the chimney and venting system with a camera, check the attic and crawl spaces where the chimney passes through, look at the crown, flashing, and cap from the roofline, and write up the findings with photos.
What Chimney Inspection Costs in Norman
| Item | Typical range in Norman |
|---|---|
| Standard chimney inspection | $99-$250 |
| Level 2 chimney inspection | $150-$350 |
| Camera inspection with photo report | Included with inspection |
Do I need a Level 2 inspection to sell my house in Norman?
Not by law in most cases, but buyers and lenders commonly ask for one, and it’s the report that answers the chimney question before it becomes a negotiating problem. A Level 2 typically runs $150-$350 in Norman. Call (888) 561-3468 for an exact quote – estimates are free.
What happens if an inspection finds a cracked flue?
A cracked flue isn’t an automatic liner replacement. If the masonry itself is still sound, HeatShield ceramic resurfacing can restore the flue from the inside and save you the cost of a full reline. We show you the footage before recommending either path. Call (888) 561-3468 and we’ll price both options.
Brands We Service in Norman
We work with a defined roster of professional-grade chimney brands rather than whatever a hardware store stocks: DuraFlex flexible liner systems, HeatShield ceramic resurfacing, Gelco caps, Olympia Chimney components, Famco, and Copperfield. You can see the full list on our brands page before you book. Most brand-specific parts are ordered in and scheduled within a normal turnaround.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Norman, OK
| Service | Typical range in Norman |
|---|---|
| Standard chimney sweep | $150-$350 |
| Prefab fireplace sweep | $120-$250 |
| Standard chimney inspection | $99-$250 |
| Level 2 chimney inspection | $150-$350 |
| Chimney crown repair | $250-$600 |
| Chimney cap installation | $150-$400 |
| Flue liner resurfacing (HeatShield) | $1,200-$2,800 |
| Full liner replacement (DuraFlex) | $2,500-$6,000 |
| Masonry repointing | $400-$1,500 |
| Chimney chase cover replacement | $300-$700 |
In Norman, price goes up mainly with access and depth of damage: a steep roof pitch on a two-story west-side home, or a flue that’s lost most of its liner and needs full replacement rather than resurfacing. We give you a flat price in writing before any work is booked, and the written estimate sets the final number.
Neighborhoods We Serve in Norman
We work across Norman, from the historic blocks near the university to the newer subdivisions on the west side. Response timing depends on the day and your location, not on which neighborhood you’re in, and we’ll give you a rough arrival window when you book.
- Central Norman and the Walker historic district
- Downtown Norman and the Campus Corner area
- West Norman subdivisions off Robinson Street
- Sooner Mall area and northwest Norman
- East Norman near Lake Thunderbird
Service Area – Cities Near Norman
We also take chimney work in the towns around Norman, and the housing stock shifts as you leave the city line. South of town, Noble, OK has a mix of older homes and newer builds with similar flue issues. To the north, Moore, OK and its 1990s-2000s subdivisions see plenty of prefab fireplace work. West toward the interstate, Newcastle, OK has rural properties where chimneys are often original to the build. Farther south, Purcell, OK rounds out the area we cover.
Serving Norman, OK – Our Local Coverage Area
We serve Norman and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Norman
Most Norman bookings can be scheduled within a few days, and we give you a window when you book. Call (888) 561-3468. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Masonry repair and liner work often require a permit through the city’s building department, and the requirements vary by scope. We’ll tell you what your job needs before booking so there are no surprises.
Yes, we cover Norman and the surrounding towns, including Noble, Moore, Newcastle, and Purcell. If you’re just outside those areas, call and we’ll tell you whether your address falls inside our service area.
If you’re due for an inspection, a sweep, or a repair, call (888) 561-3468 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Written pricing before any work starts, and camera footage you can see for yourself.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Norman Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Scott Ackerman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Stephanie Mercer"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Cedric Nash