Chimney Repair in Moore, OK | Chimney Sweep Norman

Chimney Repair in Moore - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Moore

Chimney repair in Moore starts with finding out what your flue actually is before anyone quotes a fix. A lot of the chimneys we look at here are original clay-tile stacks in 1970s and 1980s brick ranches, and a good number sit in homes rebuilt after the 1999 and 2013 tornadoes. Both kinds have surprises inside. We run a camera, show you the footage, and tell you what we’d do if it were our own house.

Call (888) 561-3468

Moore is a short run down I-35 from our Norman base, so getting to you is straightforward. Call (888) 561-3468 and we’ll book a visit. We answer 24/7.

Why Moore Homeowners Call Chimney Sweep Norman for Chimney Repair

We’re a chimney specialist, not a general handyman who adds chimneys to the list. Sweeping, repair, and inspection are the three things we do, and the same team handles all three, which means nobody points fingers when a flue problem turns out to be bigger than the sweep suggested. Our technicians have up to experience, and they work with trade-level materials you can look up by name: DuraFlex liners, HeatShield ceramic resurfacing, Gelco caps, Olympia Chimney components, Famco, Copperfield. Nothing gets installed in your chimney unless we can tell you exactly what it is and why we chose it.

Moore customers call us because we show our evidence. When we recommend a repair, you see the camera footage of the cracked tile, the spalled joint, the gap behind the insert. If your flue can be restored instead of fully relined, we’ll tell you that, even though it’s the smaller invoice. That matters in a town where a lot of homeowners have already dealt with one contractor too many.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement in Moore

Chimney Cap Replacement in Moore is one of the most common jobs we quote, and for good reason: the spring hail and tornado seasons here crack crowns and loosen mortar caps, and a homeowner usually doesn’t notice until the first fall fire smokes into the room. A cap keeps rain, birds, and debris out of the flue, and a cracked crown underneath it lets water soak into the smoke chamber and damper. A typical cap replacement in Moore runs $250 to $550 depending on the flue size and whether the crown needs patching underneath. The written estimate sets the final price.

Signs Your Cap Has Failed

Look for rust streaks on the cap mesh, a cap that’s visibly tilted, or pieces of mortar on the roof after a storm. Water stains on the damper or a musty smell in the firebox usually mean the cap and crown are both letting moisture in. None of that requires an emergency visit, but it shouldn’t wait until fall.

Cap Styles That Fit Older Flues

Older masonry flues and factory-built inserts don’t take the same cap. We match the cap to the actual flue opening, using Gelco and Olympia Chimney components where they fit properly, rather than forcing a universal size onto a stack it doesn’t seal.

Chimney Liner Installation in Moore

Chimney Liner Installation in Moore comes up most often in two situations: an older brick ranch with a clay-tile flue that’s cracked or unlined, or a post-storm rebuild where the original liner didn’t come back with the house. A stainless liner carries flue gases safely to the top and keeps them away from nearby framing. We install DuraFlex flexible systems, which handle irregular and offset flue configurations that rigid liners can’t. A typical liner installation in Moore runs $2,400 to $4,800, and the written estimate sets the final price.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (888) 561-3468

When a Liner Is Actually Necessary

A liner is necessary when the camera shows cracked tiles, gaps at the joints, or a flue never lined to begin with. It is not necessary just because a chimney is old. We show you the footage and say plainly whether the flue can wait.

HeatShield Before Full Replacement

If the clay tile is structurally sound but the joints have spalled, HeatShield ceramic resurfacing can restore the flue from the inside without tearing it out. That’s a smaller job and a smaller bill, and it’s the honest answer whenever the tile will hold.

Trusted Brands We Service in Moore

We name our materials because you deserve to research what’s going into your chimney. DuraFlex liner systems, HeatShield ceramic resurfacing, Gelco caps, Olympia Chimney components, Famco, and Copperfield are the brands we’re trained on and specify for Moore repairs. These are the same professional-grade products used in new construction and major restorations, not the hardware-store substitutes that fail early. We don’t claim to stock parts locally; we specify the right component for your flue and get it in, so there’s no substitute-and-hope. If you want to know exactly what brand is going into your chimney before you agree to the work, ask. We’ll tell you.

Common Chimney Repair Problems We See in Moore Homes

  • Unlined or cracked clay-tile flues in 1970s and 80s tract ranches. These show spalling mortar joints and cracked tiles that homeowners usually notice only when draft gets weak or smoke backs up. The camera shows the damage clearly, and that’s what a repair recommendation should be built on.
  • Post-storm rebuilds with unclear clearance. After a reconstruction, a factory-built insert or rebuilt fireplace sometimes goes in without anyone verifying the clearance to combustible framing. A Level 2 inspection settles it.
  • Cracked crowns and loosened mortar caps from spring hail and tornado seasons. Water gets into the smoke chamber and damper long before the first fall fire, and the damage shows up as rust and stains rather than a visible crack from the ground.
  • Appliances vented into a stack never designed for them. A furnace or water heater sharing a flue with a fireplace changes the load on that stack. We check what’s actually venting into it before recommending anything.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (888) 561-3468

Pricing for Chimney Repair in Moore, OK

Moore repair pricing depends on what the camera finds, so we quote by line item rather than a flat number. Typical ranges here: cap replacement $250 to $550; crown repair $300 to $700; flashing repair $350 to $800; mortar repointing and tuckpointing $600 to $1,800 depending on how much of the stack is affected; HeatShield flue resurfacing $1,200 to $2,600; full liner installation $2,400 to $4,800; and a partial chimney rebuild $2,500 to $7,000 where the brickwork has come apart. These are estimates for Moore’s market. Every quote is free, and the written estimate sets the final price, so the number you agree to is the number you pay.

We Also Serve Cities Near Moore

If you’re on the edge of town, we also work in nearby communities. Along with Moore, we take repair calls in Norman, Midwest City, Newcastle, and Choctaw. Same process everywhere: camera inspection first, evidence you can see, then a written estimate. Call (888) 561-3468 and we’ll book a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Moore, OK – Our Local Coverage Area

We serve Moore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Moore

Book a Chimney Repair Visit in Moore

If your Moore chimney needs a look, call (888) 561-3468 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, footage you can see for yourself, and a written estimate before any work starts. Our chimney repair team handles cap replacement, liner installation, and everything between under one standard of work.

Written by the team at Chimney Sweep Norman.

Why Moore Chooses Chimney Sweep Norman

We set the standard for chimney repair in Moore.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Moore

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Moore Customers Say

Trusted by homeowners across Moore and surrounding areas.

★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Scott Ackerman
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Stephanie Mercer
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Cedric Nash

Ready for Chimney Repair in Moore?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Moore.

(888) 561-3468

Request a Free Estimate in Moore

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7