Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Norman Homeowners
Most chimney problems in Norman stay invisible until they stop being cheap to fix. A hairline crack in a flue tile behind the damper, a cap that let in two seasons of rain, creosote glazed onto the smoke chamber from slow-burning fires on cold, still nights. None of it shows from the living room, and none of it gets better on its own. Our technicians have up to experience reading exactly this kind of hidden damage, and the inspection they run comes with a documented assessment you keep: photos, notes, and a clear line between what has to be addressed and what can safely wait. We’re licensed and insured, we tell you what we find before we quote anything, and the estimate is free. Call (888) 561-3468 to book a chimney sweep Norman visit with an inspection built in.
Fireplace Inspection
Fireplace Inspection is the part of the visit that focuses on the firebox you actually use: the firebox walls, damper, smoke shelf, and the first stretch of flue directly above the fire. You need one when you’ve just bought an older home and don’t know its burning history, when your fireplace has sat unused for more than a season, or when you switch between wood and a gas insert. At Chimney Sweep Norman we check the firebox for spalled brick, loose mortar joints, and a damper that no longer seats properly, then confirm the smoke chamber is free of the rough creosote that coats it. A fireplace inspection in Norman typically runs $75-$150 on its own, or it’s folded into a full inspection when it’s booked together with the sweep, and the written estimate sets the final price.
What We Look At Inside the Firebox
Brick faces, mortar joints, the damper plate, and the smoke shelf all get checked individually. We tap masonry to hear whether a joint is sound or hollow, since a failing joint allows heat to reach framing. If a firebox can be restored with HeatShield ceramic resurfacing rather than rebuilt, we’ll tell you that.
Gas Insert and Log Set Checks
Gas fireplaces have their own failure points: a burner that’s clogged with dust, a log set whose ports have closed up, and a venting path that must be confirmed clear. We verify the flue path and look for signs of incomplete combustion. Any gas-line work itself belongs to a licensed gas professional, and we’ll say so plainly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services are the full exterior-to-interior assessment of your whole chimney system, not just the firebox. They’re the right call before your first fire of the season, after a hailstorm or high wind, or whenever a home sale, insurance policy, or refinance requires documentation. We examine the crown, cap, flashing, mortar joints, flue tiles, and the interior path from firebox to termination, and we produce a written report with photos you can hand to an insurer, a real estate agent, or just keep for your own records. Chimney inspection services in Norman typically cost $99-$250 depending on the level of inspection and whether a camera is used, with the written estimate fixing the final figure before any work begins.
Crown, Cap, and Flashing Review
The crown is the concrete slab that sheds water away from the flue, and a cracked one is the most common entry point for moisture. We check the cap for a secure fit and a clear screen, and inspect the flashing where the chimney meets the roof, since that’s where leaks tend to start. Gelco caps are what we fit when a replacement is needed.

Mortar and Masonry Assessment
We probe the mortar joints from the roofline down and note any spalling brick, which is brick whose face is flaking away. Spalling and washed-out joints let water in and weaken the structure over time. Our report notes severity so you know what’s urgent and what can wait a season or two.

Chimney Flue Inspection
Chimney Flue Inspection is the focused examination of the flue itself, the vertical channel that carries smoke and gases out of the house. You need one after a chimney fire (even a small one), when you notice smoke backing into the room, or when a previous sweep reported a suspect liner. We run a camera down the flue, check for cracked or missing tiles, gaps at the joints, and signs the liner has separated from the masonry. A flue inspection in Norman generally runs $150-$300 when camera work is included, and the written estimate sets the final price. When restoration makes more sense than replacement, HeatShield is our method for sealing a deteriorated flue without tearing out the liner.
Cracked and Spalled Flue Tile
Clay flue tiles crack under heat cycling, and a cracked tile exposes the mortar and framing behind it to direct heat and gases. A camera pass shows cracks a visual check from below can’t reach. Even a hairline crack matters, because gases travel through pathways water can’t.
Liner Gaps and Offsets
Older flues often have offset joints or a section where the liner has shifted. Gaps at those joints let creosote collect and let combustion gases escape into the chimney cavity. Where a full liner is needed, we fit DuraFlex flexible liner systems, which handle irregular and offset flue configurations that rigid liners can’t navigate.
Chimney Fire
Chimney Fire is the burning of creosote that has accumulated inside the flue, and it can happen without the roar and sparks people expect. A low, rumbling chimney fire may go unnoticed by anyone in the house, but it still reaches temperatures that crack tiles and warp a damper. You need an inspection after any suspected chimney fire, and any time creosote has built up to the point where a hot fire could ignite it. We inspect the full flue for heat damage, check the firebox and damper for warping, and clear the creosote that fed it. Post-fire inspections in Norman typically run $150-$350 depending on damage found and camera use, and the written estimate sets the final figure.
Signs a Chimney Fire Happened
Puffy, honeycombed creosote, discolored or cracked flue tiles, a warped damper, and a strong burnt smell that lingers are the telltale signs. A fire can burn out on its own without the fire department ever being called, so the evidence in the flue is often the only proof. Any of these signs means the flue needs a professional inspection before the next fire.
Creosote Grades and Ignition Risk
Creosote builds in three stages, from a light soot to a glazed, tar-like coating that’s hardest to remove and easiest to ignite. A flue caked in glazed creosote is the one most likely to support a chimney fire. We remove it with rotary tooling and, where needed, chemical treatment, then verify with the camera.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the standard inspection required for most real estate transactions and after any chimney fire or seismic event, and it goes beyond what a basic visual check covers. It includes everything visible AND the accessible portions of the chimney interior via camera, plus the attic and crawl space if the chimney passes through them. We document each finding with photos and a written summary you can hand to a buyer, seller, or insurer. A Level 2 chimney inspection in Norman typically costs $150-$350 depending on the chimney’s configuration and whether attic or crawl space access is required, with the final price set by the written estimate.
When a Level 2 Is Required
Most real estate contracts expect a Level 2 when a property changes hands, and insurers often ask for one before covering a home with an older chimney. It’s also the right inspection after a chimney fire, a chimney collapse nearby, or a change in the appliance or fuel type. If the flue hasn’t been examined with a camera in years, a Level 2 is the honest starting point.
What the Report Includes
The report covers the flue interior, firebox, damper, crown, cap, flashing, and any accessible attic or crawl space where the chimney passes. Findings are noted with a severity so a buyer can tell cosmetic wear from structural concerns. Photos are included so nothing in the report has to be taken on faith.
Chimney Leak
Chimney Leak is water getting into the chimney system through the crown, cap, flashing, or masonry itself, and it’s often mistaken for a roof problem until a chimney inspection traces it. You need one when you see water stains on the ceiling near the chimney, damp patches on the firebox floor, or crumbling mortar on the exterior. We trace the entry point with a moisture check and a careful look at the crown, cap, and flashing, and we correct the cause rather than patching the symptom. Chimney leak diagnosis and repair in Norman typically runs $200-$600 depending on where the water is getting in, and the written estimate sets the final price before work begins.
Tracing the Water Path
Water is good at traveling sideways under flashing, so the spot on your ceiling isn’t always the spot to fix. We check the crown first, then the cap, then the flashing, working from the top down. Once the path is identified, we address the actual opening instead of sealing a guess.
Crown and Cap Repair
A cracked crown can be rebuilt or resurfaced, and a loose or rusted cap can be replaced with a Gelco cap that fits the flue and keeps water and animals out. Both repairs address repeated leak sources rather than a one-time sealant patch. We’ll tell you which one your chimney needs and why.
Chimney Camera Inspection
Chimney Camera Inspection is the video pass down the flue that shows the inside of the chimney in real time, and it’s often the only way to see problems a look from the firebox can’t reach. You need one when a sweep reports an issue it can’t fully assess, when you’re buying an older home, or when a previous owner’s repair quality is in question. We record the pass and share the footage so you see exactly what we see, then note defects with photos in the report. A chimney camera inspection in Norman typically runs $150-$300 on its own, or is included in a Level 2 inspection, and the written estimate sets the final figure.
What the Camera Reveals
The camera catches cracked tiles, separated liner joints, offset sections, and heavy creosote the eye can’t see from below. It also confirms whether a prior repair was done properly or simply covered over. Because the footage is shared with you, the finding isn’t just our word.
How the Recording Helps You
The saved footage is useful if you’re buying or selling a home and need to document the chimney’s condition. It’s also a baseline to compare against future inspections. If you ever need to justify a repair to an insurer, the video does that work.
Brands We Service
We work with a defined set of professional-grade chimney brands so the materials going into your home are the same ones used in new construction and major restorations. DuraFlex flexible liner systems are what we fit when an older or irregular flue needs relining, and we know where that liner holds up and where the installation detail matters most. HeatShield ceramic resurfacing is our method for restoring a deteriorating flue without a full liner replacement, and it works best on masonry that’s still structurally sound. Gelco caps are what we use when a cap needs to be replaced with one that fits the flue and stays put, and Olympia Chimney components cover the smaller pieces that keep a system working as a whole. We don’t hide the brand names behind a “quality parts” line, because you should be able to look up exactly what’s being installed in your chimney.
Whether you have a DuraFlex liner already in place, a HeatShield restoration from a previous owner, or an older system with no documentation at all, we can work with it. The same goes for Olympia Chimney and Gelco components, and for the flues that don’t carry a name at all. If you’ve got Copperfield or any other make, we can help identify what’s there and what it needs. Our job is to tell you what we find and what we’d do about it, not to sell you a brand you don’t need.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. Smoke that rolls out of the firebox instead of up the flue usually means a blockage, a damaged flue, or a pressure problem in the house. It’s worth an inspection before the next fire, since the same blockage that pushes smoke in also pushes carbon monoxide in.
- A burnt or acrid smell, especially in warm weather. A strong smell from the fireplace when it’s not in use often points to creosote or debris that’s off-gassing. Warm days pull that smell down into the living space, which usually means the flue needs cleaning.
- Water stains or damp patches near the chimney. Staining on the ceiling or the firebox floor is water getting in somewhere above. It won’t fix itself, and the longer it runs, the more masonry it damages.
- Crumbling mortar or spalling brick on the exterior. Flaking brick faces and washed-out joints mean water has been getting into the masonry. The fix is often smaller now than it will be a season from now.
- A damper that won’t close or open smoothly. A stuck damper is a sign of warping, rust, or debris, and it affects how the fireplace drafts. It also means heat from the house escapes up the flue when the fireplace isn’t in use.
Our Process, Step by Step
- 1
Book the visit and set the scope. We ask what’s prompting the inspection, whether it’s a first fire of the season, a home sale, or a leak, so the visit covers the right level of inspection. You get a clear picture of what we’ll do before anyone shows up.
- 2
Protect the living space. Drop cloths and a shop vacuum go down before we start. The point is to leave the room as we found it, minus the creosote.
- 3
Inspect the firebox, damper, and smoke chamber. We check masonry and joints by hand and eye, and operate the damper to confirm it seats. Anything that looks suspect gets noted for the report.
- 4
Run the camera down the flue. The video pass shows the interior from firebox to termination, and we record it. This is where most of the real findings come from, since the flue’s condition isn’t visible any other way.
- 5
Walk the exterior and write it up. Crown, cap, flashing, and mortar get inspected from the roof, then the findings go into a written report with photos. We review it with you and separate what needs attention now from what can safely wait.
How Much Does Chimney Inspection Cost in Norman?
Chimney inspection pricing in Norman depends on the level of inspection, whether camera work is included, and how accessible the flue and roof are. A basic visual inspection typically runs $75-$150. A Level 2 inspection with camera work typically runs $150-$350 depending on the chimney’s configuration and whether attic or crawl space access is needed. A focused flue or camera inspection on its own typically runs $150-$300. Leak diagnosis and repair is a separate line, usually $200-$600 depending on where the water is getting in, and any repair beyond the inspection is quoted separately from what the inspection found. The written estimate sets the final price, and the estimate itself is free.
What affects the price most is the level of inspection and whether a camera is used, since camera work finds defects a visual check misses. Roof pitch and access matter too, and an older chimney with offset flues takes longer than a straight one. To avoid overpaying, ask what level of inspection you’re getting and whether the report includes photos and video. Skip any quote that can’t tell you which level it covers or what it found. A free estimate from us includes the findings, the photos, the recommended path, and a written price before anything is authorized. Call (888) 561-3468 for an exact quote.
Our Service Area Near Norman
We inspect and sweep chimneys across the Norman area, including Norman, Slaughterville, Purcell, and the surrounding communities of Bethel Acres, Tecumseh, Noble, Moore, Newcastle, Midwest City, and Choctaw. We book visits Sunday through Friday, 7am to 7pm, and same-day scheduling is often possible. Call (888) 561-3468 to check the next opening near you. We answer 24/7.
Serving Norman, OK – Our Local Coverage Area
We serve Norman and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Norman
A chimney inspection is a professional assessment of the chimney system, from the firebox and damper up through the flue to the cap and crown. It covers the parts you can’t see from the living room and produces a documented report of what’s found. It’s not the same as a cleaning, though the two are often done on the same visit. Call (888) 561-3468 for an exact quote – estimates are free.
A chimney inspection usually takes 45 minutes to about an hour and a half, depending on the level of inspection and how accessible the flue and roof are. A Level 2 with camera work and attic or crawl space access takes the longer end of that range. If a repair is needed, we scope it separately rather than stretching the visit. Call (888) 561-3468 to book a time.
A basic inspection in Norman typically runs $75-$150, and a Level 2 with camera work typically runs $150-$350 depending on configuration and access. A focused flue or camera inspection on its own typically runs $150-$300. The written estimate sets the final price, and the estimate is free. Call (888) 561-3468 for an exact quote.
Yes, we service DuraFlex liner systems and HeatShield ceramic restorations, along with Gelco, Olympia Chimney, and Copperfield components. Those are the brands we work with on a regular basis, so we know where each one wears and how to assess it. Whether you have one of those or a different make entirely, we can inspect it. Call (888) 561-3468 to talk through what you have.
Same-day inspection is often possible depending on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We’re closed Saturday, and we don’t promise a same-day slot we can’t keep. Call (888) 561-3468 to check the next opening.
Our repairs are backed by a satisfaction guarantee, and the written estimate spells out what’s covered before you authorize anything. If something we addressed isn’t right, we’ll come back and make it right. Call (888) 561-3468 for the specifics on your job – estimates are free.
Clear the area around the fireplace, and make sure we can reach the fireplace and any attic or crawl space access. Don’t burn anything for at least 24 hours before the visit so the flue is cool and the camera view is clear. If you have a prior inspection report or a record of any repairs, have it handy. Call (888) 561-3468 if you’re not sure what to do – estimates are free.
Schedule Your Chimney Inspection Service in Norman Today
Getting your chimney inspected now means knowing what’s in the flue before you light the first fire of the season. We’ll document what we find, show you the photos, and tell you plainly what needs to be done and what can safely wait. Call (888) 561-3468 for a free, no-obligation estimate. We answer 24/7, and same-day scheduling is often possible. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Norman.