Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Moore, OK
We provide independent Gelco chimney cleaning and service across Moore, OK. The one thing that sets our Gelco work here apart: because so many Moore homes were rebuilt or repaired after major tornadoes, your fireplace and flue may have been reconstructed by a storm-repair contractor, so we treat clearance verification and Level 2 inspection as routine rather than optional. We’re an independent shop. We aren’t affiliated with, authorized by, or a dealer for Gelco. We service Gelco caps, inserts and flue components with quality parts that fit them. Our technicians have up to experience. Call (888) 561-3468. We answer 24/7, and fast dispatch runs 7am to 7pm.
Why Moore Residents Choose Us for Gelco Service
Gelco equipment isn’t exotic, but it does require a sweep who understands how these units age. We work on Gelco direct-vent gas inserts, wood-burning inserts, factory-built fireplace units, and Gelco-style multi-flue and top-mount caps. Because we also handle DuraFlex liner systems and HeatShield flue restoration, we diagnose what your specific unit needs instead of pulling a standard script off the shelf.
We know Moore’s housing. Brick ranches and two-stories from the 1970s through the 1990s, plus post-2013 rebuilds, mostly with masonry fireplaces or factory-built inserts. We tell you exactly what we’re putting in your chimney and why, brand names disclosed upfront so you can look them up yourself. Scheduling is straightforward: we book a sweep, show up when we said, and hand you a documented report. Sweep. Repair. Inspect. One company, one standard of work. Call (888) 561-3468 to book a Gelco service visit in Moore.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Moore
These are the issues that show up on Gelco units in Moore again and again:
- Cracked or spalling crowns and loosened mortar caps. Spring hail and tornado seasons hammer Moore roofs, and a cracked crown is easy to miss until the first fall burn sends water or smoke where it shouldn’t go. Crown repair or coating, paired with a cap replacement, is the usual fix, and it’s a good reason to schedule a spring inspection as well as a fall cleaning.
- Displaced or crushed dampers and firebox damage. After a home rebuild or a Gelco insert reset with the wrong clearances, dampers and firebox panels take the hit. A stuck damper often traces back to that, not to the fireplace itself. A Level 2 inspection documents what the reset left behind.
- Creosote glaze in Gelco wood inserts. Moore’s short, cold winters mean steady burning from November through February, and steady loads build glazed creosote that a brush can’t fully remove. Glazed creosote is a fire-safety concern, not a maintenance checkbox, so it gets removed thoroughly rather than skimmed.
- Flashing and cap seam water intrusion on factory-built Gelco chases. Spring hail impact and driving rain work at the seams where the chase meets the roofline. Water staining on the firebox or a rusted damper usually means the flashing or cap seam has been leaking.
- Clearance problems in storm-rebuilt flues. When a flue or chase was reconstructed, the clearances around the insert and the flue itself may not match the original spec. We verify them and tell you plainly what we find.
Gelco Service in Moore: What Local Conditions Mean for Your Equipment
Moore sits in the heart of Tornado Alley. The 2013 EF5 and the 1999 tornadoes left thousands of homes rebuilt or repaired, and many of those fireplaces and flue systems were reconstructed by storm-repair contractors. That reshapes what a Gelco service call here actually is. Often it’s not a routine seasonal cleaning at all: it’s a Level 2 inspection of a rebuilt system, checking clearances around a Gelco insert and verifying that the reconstructed flue, chase and cap meet spec. In Moore’s neighborhoods of post-storm rebuilds and older brick tract homes, we regularly find fireplaces where the crown and cap seams were never properly tied back to the roofline. And spring hail keeps cracking crowns and loosening mortar caps that homeowners don’t spot until the first fall fire. So spring post-storm inspections matter here as much as fall cleanings. If your Gelco insert sits in a rebuilt home, treat the first visit as a documented assessment, not just a sweep.
Gelco Models & Products We Service in Moore
We service the range of Gelco equipment you’ll find in Moore homes: direct-vent gas fireplace inserts, wood-burning fireplace inserts, factory-built fireplace units, and multi-flue and top-mount caps. Quality parts matter for fit. We use Gelco parts where the damper, firebox panels or cap geometry call for a specific fit, and quality aftermarket for standard dampers, caps and flashing when the original is discontinued. If a cracked firebox or rusted chase means the unit is beyond safe repair, we say so plainly instead of patching it for another season. For Gelco expertise and material specifics, see our Gelco brand page.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Moore
Every job is priced per job by a free written estimate. What drives cost on a Gelco service call: whether you need a routine sweep or a Level 2 inspection of a rebuilt flue, how much glazed creosote has built up, whether the crown needs repair or coating, and whether a cap replacement or waterproofing is part of the work. The written estimate sets the final price, and nothing gets added without your approval. We don’t quote vague “discount sweep” numbers. Call (888) 561-3468 for your free estimate on Gelco service in Moore.
Serving Moore, OK – Our Local Coverage Area
We serve Moore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Moore
Because Moore’s storm-rebuild history means your fireplace and flue may have been reconstructed by a storm-repair contractor, a Level 2 inspection verifies clearances and the rebuilt system rather than just cleaning it. Thousands of homes here were rebuilt or repaired after the 1999 and 2013 tornadoes, so this is routine here, not optional. Call (888) 561-3468 to book one.
A stuck damper often follows a home rebuild or a Gelco insert reset with incorrect clearances, which can displace or crush the damper and damage the firebox. It’s rarely the fireplace failing on its own. A Level 2 inspection documents what the reset left behind.
Spring matters here because Moore’s hail and tornado seasons crack crowns and loosen mortar caps, damage homeowners miss until the first fall fire. A spring post-storm inspection catches it early. Fall cleaning still matters too. Call (888) 561-3468 to book a spring inspection.
Often yes. A cracked crown can be coated or repaired rather than rebuilt when the masonry underneath is sound. We tell you plainly which path fits, and the written estimate sets the price. Call (888) 561-3468 for an assessment.
Usually. We use Gelco parts where the fit is specific, and quality aftermarket for standard dampers, caps and flashing when the original is discontinued. If the unit is beyond safe repair, we’ll say so rather than patch it. Call (888) 561-3468 with your insert details.
Service Areas Near Moore
Along with Moore itself, we serve homeowners in Norman, Slaughterville, Purcell, Bethel Acres, Tecumseh and Noble. If you’re in or around any of these communities, we can schedule your Gelco sweep, repair or inspection. Our Moore page covers local scheduling, and clients in Norman and Midwest City can book the same Gelco service. Call (888) 561-3468 to find your nearest opening.
Book Your Gelco Service in Moore Today
Ready to get your Gelco insert or cap serviced the right way? We’ll book a sweep, repair or Level 2 inspection, and give you a free written estimate with the parts named upfront. Call (888) 561-3468. We answer 24/7. Fast dispatch from 7am to 7pm.
Written by the team at Chimney Sweep Norman.