Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Moore, OK
Chimney inspection in Moore starts with a question most cities never have to ask: was this flue rebuilt after a tornado, and does it still meet clearance? With up to experience on our team, we work in a lot of 1970s to 1990s brick ranches and post-2013 rebuilds where the fireplace was reconstructed or replaced, and we check the parts of that work nobody can see from the living room. Sweeping removes the creosote. Inspection tells you whether the chimney is safe to use at all. Call (888) 561-3468 and we’ll book a visit.
Why Moore Homes Are Different
Moore sits deep in Tornado Alley, and the 1999 and 2013 tornadoes reshaped a huge share of the housing here. Thousands of homes were rebuilt or heavily repaired, which means many fireplaces and flues in this city were reconstructed or swapped out during that recovery. A chimney that went back in with a rebuild doesn’t always have the clearances a fresh build would, and the only way to know is to look. That’s the local reality behind our inspection-first approach.
The other half of the story is the weather cycle. Winters here are short and cold, so fireplaces carry steady use from November through February, laying down creosote month after month. Then spring arrives with hail and the occasional tornado, and that’s when chimney crowns crack and mortar caps work loose. Homeowners tend to miss both until the first cold snap. In Moore, a spring post-storm inspection matters every bit as much as a fall cleaning, and the two together are what keep a flue in service.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Moore Services
Two jobs bring most Moore homeowners to the phone: a seasonal sweep and a repair once something has cracked, spalled, or come loose.
Chimney Sweep in Moore
A sweep here means more than brushing out a firebox. We remove creosote from the flue, clear the smoke chamber and damper, and check that the cap is still seated after whatever the spring threw at it. Late-20th-century brick homes in Moore often have masonry fireplaces that haven’t been opened in years, and the buildup inside tells you how they were actually used. If you want the full picture of how a cleaning visit runs in this city, read our chimney sweep page before you book.

Chimney Repair in Moore
Repair work in Moore splits into two paths: restoring a liner that’s still structurally sound, or replacing one that isn’t. HeatShield ceramic resurfacing lets us rebuild a deteriorating flue from the inside without tearing out masonry, and DuraFlex flexible liners handle the irregular flue configurations that show up in older and rebuilt homes. Cracked crowns and loose caps from storm seasons fall here too. Our chimney repair page covers what each path involves.

Chimney Inspection in Moore
A chimney inspection in Moore answers a question specific to this city: was this flue reconstructed or replaced after a storm, and is the clearance around it correct? The 1999 and 2013 tornadoes left thousands of rebuilt and repaired homes behind, and plenty of those chimneys went back in without anyone verifying what sat against what. Our technicians have up to experience reading exactly that kind of history, and we document it so you have something to hold.
The 1970s through 1990s tract homes that dominate Moore’s streets have their own pattern. Factory-built inserts added later, masonry fireplaces that sat unused for a decade, and crowns that took hail damage in a spring storm all show up on the same chimney. An inspection sorts the cosmetic from the structural, and it tells you which problems can safely wait.
Fireplace Inspection
Signs you need it
Smoke rolling back into the room, a damper that won’t seal, or a firebox with cracked brick joints all point to a fireplace inspection, and so does simply buying or selling an older Moore home.
What it costs in Moore
A fireplace inspection here typically runs $99 to $250, with the written estimate setting the final figure once we’ve seen the firebox and damper.
How we do it
We examine the firebox, damper, smoke chamber, and hearth, check clearances to combustibles, and photograph what we find so you can see it yourself.
Level 2 Chimney Inspection
Signs you need it
A post-storm rebuild, a liner replacement, a change of fuel appliance, or a real estate transaction calls for a Level 2 inspection, which goes beyond what a camera pointed up the flue can show.
What it costs in Moore
Expect roughly $150 to $450 for a Level 2 in Moore, depending on flue configuration and how much of the chimney we can reach.
How we do it
We run a video camera through the full flue, inspect the attic and crawl space for clearance issues, check the crown and cap, and put the findings in a written report.
What Chimney Inspection Costs in Moore
| Item | Typical range in Moore |
|---|---|
| Fireplace inspection | $99 – $250 |
| Standard chimney inspection | $99 – $250 |
| Level 2 chimney inspection | $150 – $450 |
What pushes the figure up in Moore is access: a rebuilt chimney with an offset flue or a tight attic clearance takes longer than a straight shot up a ranch home. We agree the price before we book, and the written estimate is what you pay.
Do I really need a Level 2 inspection after storm repairs?
Yes, if your chimney was rebuilt or replaced and you don’t have documentation of what was verified. A Level 2 confirms clearances and liner condition that a basic look can’t reach. If it turns out everything is sound, we’ll tell you that plainly.
Can an inspection wait until fall in Moore?
Spring is when hail cracks crowns and loosens caps, so waiting means a damaged chimney sits through summer storms before anyone checks it. If you haven’t burned since the last storm season, book it now. Call (888) 561-3468 – estimates are free.
Brands We Service in Moore
We work with professional-grade chimney materials because they hold up: HeatShield for ceramic flue resurfacing, DuraFlex for flexible liner retrofits, and Gelco for caps and related components. We don’t claim to stock parts locally, and turnaround depends on what the inspection finds. You can see the full roster on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Moore, OK
| Service | Typical range in Moore |
|---|---|
| Fireplace inspection | $99 – $250 |
| Standard chimney inspection | $99 – $250 |
| Level 2 chimney inspection | $150 – $450 |
Price in Moore moves with flue configuration and access, not with how fast you need us. Larger or longer flues are typical in rebuilt homes and cost more to clean and inspect. The written estimate sets the final price, and we agree it before booking.
Neighborhoods We Serve in Moore
We work across Moore’s residential streets, from the older brick ranches near the center of town out to the post-2013 rebuilds on the edges. Because this city is compact, response is straightforward almost anywhere you are. Our technicians have up to experience and know what the housing stock looks like block to block, so we arrive expecting either a 1980s masonry fireplace or a rebuilt flue and plan the visit accordingly. Call (888) 561-3468 and we’ll book you in.
- Old Town Moore
- Broadway Avenue corridor
- Sooner Road area
- East Moore near Sunnylane
- Newer rebuilds along the south side
Service Area – Cities Near Moore
Moore sits just south of Norman, and we cover the surrounding communities from the same phone line. If you’re in Norman, OK next door, we work there regularly. Same for Midwest City, OK to the north and Newcastle, OK to the west. Further east, Choctaw, OK is covered too. One booking number handles all of it.
Serving Moore, OK – Our Local Coverage Area
We serve Moore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Moore
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (888) 561-3468 and we’ll book the next available opening. Moore is close to our Norman base area, so scheduling is usually quick.
Most structural chimney work, including liner replacement, requires a permit from the City of Moore, and some HOAs restrict exterior changes like caps or chase modifications. Check with your HOA and the city building department before work begins, and we’ll tell you what the job involves so you can ask the right questions.
Yes. We serve all of Moore plus Norman, Midwest City, Newcastle, and Choctaw. If you’re unsure whether your address falls inside, call (888) 561-3468 and we’ll confirm before booking anything.
If creosote has built up over a winter of steady fires, or a spring storm left you wondering about your crown, don’t wait for the first cold night to find out. A clean chimney is a fire-safety decision, not a maintenance checkbox. We tell you exactly what’s going in your flue and why, and if your liner can be restored instead of replaced, we’ll say so. Sweep, repair, and inspect, handled by the same team with trade-grade materials. Call (888) 561-3468 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Moore Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Scott Ackerman"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Stephanie Mercer"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Cedric Nash